Double-layer molding machine production of products with light weight, high strength, bearing capacity, good seismic characteristics, is widely used in high-rise steel structure of the field.

Double-layer molding machine, including: PLC computer control system, Double Layer Forming Machine special cutting equipment, professional hydraulic system.

Double-layer molding machine mainly by the feed into the platform, forming the host, forming shear device, hydraulic station, computer control system composed of several parts. Up and down conversion operation is simple, just through the control cabinet on the switch button to control the control of each layer, Double Layer Forming Machine power can also be controlled by the clutch each layer. Optional configuration of the general discharge machine, hydraulic discharge machine. The upper and lower models are subject to customer requirements.

Double-layer molding machine is both solemn and elegant, beautiful and beautiful, and the appearance of smooth, ripple uniform, high utilization, high strength, Double Layer Forming Machine high degree of automation, low cost, durable. In the case of

Double-layer molding machine will be two models are perfect combination, reasonable structure, beautiful appearance. With the advantages of saving space, simple operation, especially for small site and site construction customers use.

Double-layer molding machine mainly by the feed into the platform, forming the host, forming shear device, hydraulic station, computer control system composed of several parts.

Up and down conversion operation is simple, just through the control cabinet on the switch button to control the control of each layer, Double Layer Forming Machine power can also be controlled by the clutch each layer.

Optional configuration of the general discharge machine, hydraulic discharge machine.

The upper and lower models are subject to customer requirements.

Double Layer Forming Machine The main technical parameters:

1. Installation size: 570000mm × 1500mm × 1500mm

2. Molding Road: 9/11 Road

3. Roller material: 45 # steel

4. Roller plating thickness: 0.05mm

5. Cutter material: Cr12

6. Molding speed: 9-10m / min.

7. Electronic control system: industrial computer PLC control

8. Host power: 3KW

9. Hydraulic station power: 3KW

10. Plate thickness: 0.4-0.7mm